Brushed and Polished Watch Cases: Grain, Edges and Reflections

Look at one lug, the arm of the case that holds the bracelet or strap. On its top face, can you follow a fine line from the case toward the tip? On its side, can you recognize the outline of something in the room? The first clue is grain, the second is a reflection. To locate a change of finish, find where one pattern gives way to the other and check the same spot in a second view.

Read the grain on one face at a time

Brushing often leaves a field of fine lines running in a common direction. Use the shape of the part to give that direction a name. “The lines run from the base of the lug toward its tip” is more useful than “the lines run down,” which stops making sense as soon as someone rotates the picture. On a round surface, look to see whether the lines follow the rim. A single mark crossing an otherwise regular field tells you little about the direction of the finish.

A brushed face can catch enough light to look almost white. Steel producer Outokumpu even describes one of its brushed sheet finishes as slightly glossy. Look for a patch where the individual lines are in focus. If the whole lug is a white patch with no detail, that frame leaves the grain direction open.

Use the shape of a reflection

A mirror-polished surface can show a recognizable outline, such as the edge of a window or a white card. A dark band on the side of a case may simply be the reflection of a dark sleeve. Try holding a white card beside the watch, outside the frame, and move it slowly. Watch where its edge appears on the case. A curved flank can stretch the reflected edge into a long stripe.

Describe what you can resolve. “The side reflects the edge of the card” says more than “the side is shinier.” It also leaves room for fine finishing lines that the photograph cannot resolve. You cannot assign a steel grade, an abrasive grit or a roughness value from how bright the stripe looks.

Trace the boundary from the lug tip back to the case

Start at the tip, where you can identify the top and side of the lug. Trace the top face back toward the case body. Does its grain stop at the outline of a narrow third face between the top and the side? If that strip is a sloping face joining the top and side, it is a bevel. A change in finish can also occur on a continuous face. In that case, look for the line where the texture changes without assuming the metal changes slope.

For a documented design example, Audemars Piguet describes how wider case bevels changed the contrast between polished and satin-brushed areas on its 50th-anniversary Royal Oak models, with the Jumbo models excluded from that change. On another watch, establish the shape from its own contours. A bright stripe on a lug is too little evidence to call it a polished bevel.

Make the second photograph answer one question

  1. Is that stripe a reflection? Support the watch and keep the camera still. Move the card or light sideways, leaving the same lug tip in focus. Compare the stripe against the tip. If it travels across the face, you have located a moving highlight. A finish boundary can remain in place even when the new light makes it hard to see.
  2. Is there a separate face? Return the light to its first position, then lower the camera slightly so the top and side are both visible. Follow the suspected bevel to the tip. If you can still trace only one bright line and cannot see the width of a face, leave the bevel unconfirmed.

Keep both frames and note which variable changed. For a moving stripe, record where it started and where it ended relative to the lug tip. For a possible finish boundary, name the feature you could still trace after the light moved.

A short checklist for a case photo

  • Name the part and side, such as the crown-side lug at six o’clock.
  • Describe the grain relative to the part, and the reflection by an outline you can recognize.
  • Follow the apparent boundary to a fixed point in both views.
  • State what remains hidden by glare, focus or the angle. Leave the tool, alloy, refinishing history and quality grade open unless you have separate evidence.

Sources

  • Outokumpu, Deco range. Its descriptions of brushed and polished stainless sheet illustrate the range of appearances a finish name can cover. Surface finishes.
  • International Molybdenum Association, Practical Guidelines for the Fabrication of Austenitic Stainless Steels, second edition, Table 29. The descriptions of directional texture and mirror reflection concern sheet finishes. Technical guide (PDF).
  • Audemars Piguet, It Takes Time to Create the Extraordinary. The case-design section identifies the Royal Oak models covered by its account of the bevel change. Manufacturer’s account.

Comments

2 responses to “Brushed and Polished Watch Cases: Grain, Edges and Reflections”

  1. […] Soft, diffused light is a useful starting point for small reflective objects, as Nikon explains in its jewelry photography guide. You still want enough contrast to see the outline. For a closer look at bright bands and surface transitions, see our guide to brushed and polished watch cases. […]

  2. […] For a closer look at grain, polished reflections and bright bands along an edge, see our guide to brushed and polished watch case finishes. […]

Leave a Reply

Your email address will not be published. Required fields are marked *